Concrete fibres for
every structure.
From structural macro-fibres that replace steel reinforcement to micro-fibres against shrinkage cracks — synthetic, basalt and steel, all CE certified.
Structural concrete fibres.
Macro-fibres that (partially) replace steel reinforcement. They structurally increase flexural tensile strength and ductility.
Most chosenTwistR® GREEN HYBRID
High-performance synthetic macro fibres made from 100% polypropylene. Transforms concrete into a stronger composite material.
- TypeHybrid: twisted monofilament + fibrillating network fibre
- Material100% virgin polypropylene
- Length48 mm
- Dosage2.0 – 6.0 kg/m³
Pallet price on request
Wiking 4050 TR
High-performance polyolefin macro fibre, ideally suited to rough floors — a strong and cost-effective alternative to steel reinforcement.
- TypePolyolefin macro fibre (monofilament)
- Length48 mm
- Diameter700 µm
- Tensile strength557 MPa
Pallet price on request
Basalt Wave
Wave-profile basalt fibre for excellent bonding in the concrete matrix. High temperature resistance for demanding constructive applications.
- TypeBasalt macro fibre (wave-profile 3D)
- Length50 mm
- DiameterØ 1.2 mm
- Strand tex2000 tex
MPZG HT+ 35/0.55
High-tensile hooked steel fibres with aspect ratio 35/0.55. Maximum anchorage and ductility for heavily loaded structures.
- TypeCold-drawn hooked steel fibre (glued)
- Dimensions35 mm / Ø 0.55 mm
- Tensile strength1345 N/mm² ± 7.5%
- Modulus of elasticity200,000 N/mm²
Pallet price on request
MPWG HT+ 50/0.90
High-tensile hooked steel fibres with aspect ratio 50/0.90. Maximum anchorage and ductility for heavily loaded structures.
- TypeCold-drawn hooked steel fibre (glued)
- Dimensions50 mm / Ø 0.90 mm
- Tensile strength2100 N/mm² ± 7.5%
- Performance class56
Pallet price on request
MPWG HT+ 60/0.75
High-tensile hooked steel fibres with aspect ratio 60/0.75. Maximum anchorage and ductility for heavily loaded structures.
- TypeCold-drawn hooked steel fibre (glued)
- Dimensions60 mm / Ø 0.75 mm
- Tensile strength2100 N/mm² ± 7.5%
- Modulus of elasticity210,000 N/mm²
Pallet price on request
Shrinkage fibres (micro-fibres).
Synthetic and basalt micro-fibres that prevent plastic shrinkage cracks in the early concrete phase.
Profib
Fibrillated PP micro fibre for plastic shrinkage crack control, strong in sand-cement screeds. Disperses homogeneously through the concrete.
- TypePolypropylene (fibrillated tape)
- Length6 and 12 mm
- Number of fibres per kg100,000
- Tensile strength370 MPa
Pallet price on request
Promicro
Synthetic PP monofilament micro fibre against plastic shrinkage cracks. Homogeneous dispersion and better surface quality at a low dosage.
- TypePolypropylene monofilament (round cross-section)
- Length12 mm
- Equivalent diameter32 µm
- Linear density6.5 dpf
Pallet price on request
Basalt Roving
Basalt fibre that reinforces concrete, reduces cracking and increases durability.
- TypeBasalt – Shrinkage
- Monofilament diameter13 – 23 µm
- Cut length8 and 12 mm
- Moisture content< 0.1%
Pallet price on request
Basalt Chopped
High-performance chopped basalt fibre for concrete and mortar that reduces cracking and increases durability.
- TypeChopped basalt fibre (chopped strands)
- Strand tex300 tex
- Filament diameter12 µm
- Length4 mm (other cut lengths on request)
Pallet price on request
Not sure about the
right fibre?
View our technical documents or ask our specialists for advice directly.
Fibre selector
Not sure which fibre you need?
Answer a few short questions and receive an instant product recommendation for your concrete or asphalt project.